Eurotherm 3116 PID Podręcznik Użytkownika Pobierz pdf (Strona 4)

3116 User Guide Part No. HA028005ENG Issue 2.0 May 04

ENG

Installation and Basic Operation

1. What Instrument Do I Have?

Thank you for choosing the 3116 Temperature Controller.

This User Guide takes you through step by step instructions to help you to install, wire, configure and use the controller.

For features not covered in this User Guide, a detailed Engineering Manual, Part No HA027986, and other related

handbooks can be downloaded from www.eurotherm.co.uk

The controller may have been ordered to a hardware code only or pre-configured using an optional ‘Quick Start’ code.

The label fitted to the side of the sleeve shows the ordering code that the controller was supplied to where the last two

sets of five digits show the Quick Code. If the Quick Code shows XXXXX the controller will need to be configured when it

is first switched on.

1.1 Unpacking Your Controller

The following items are included in the box:-

• Controller mounted in its sleeve

• Two panel retaining clips mounted on the sleeve

• IP65 sealing gasket mounted on the sleeve

• Component packet containing a snubber for each relay output (see section 3.6) and a 2.49Ω resistor for current

inputs (see section 3)

• This User Guide

1 2 3 4 5 6 7 8 9 ... 39 40

Brak uwag

Eurotherm 3116 PID Podręcznik Użytkownika Strona 4