Eurotherm 3116 PID Podręcznik Użytkownika Pobierz pdf (Strona 19)

ENG

3116 User Guide Part No. HA028005ENG Issue 2.0 May 04

5.4.1 To Set The Required Temperature.

From the HOME display:-

Press

▲

▲▲

▲

to raise the setpoint

Press

▼

▼▼

▼

to lower the setpoint

The new setpoint is entered when the button is released and is indicated by a brief flash of the display.

5.4.2 Alarm Indication

If an alarm occurs the red ALM beacon will flash, a scrolling message will give the source of the alarm and the alarm

(relay) output will operate.

Press

and

(ACK) together to acknowledge

If the alarm is still present the ALM beacon lights continuously.

The action which takes place depends on the type of alarm configured:-

Non latching A non latching alarm will reset itself when the alarm condition is removed

Auto

Latching

An auto latching alarm requires acknowledgement before it is reset. The acknowledgement can occur

BEFORE the condition causing the alarm is removed.

Manual

Latching

The alarm continues to be active until both the alarm condition is removed AND the alarm is

acknowledged. The acknowledgement can only occur AFTER the condition causing the alarm is

removed.

5.4.3

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 39 40

Brak uwag

Eurotherm 3116 PID Podręcznik Użytkownika Strona 19