Eurotherm 3116 PID Podręcznik Użytkownika Pobierz pdf (Strona 37)

ENG

3116 User Guide Part No. HA028005ENG Issue 2.0 May 04

6.8 To Operate the Timer

If the timer is configured it can be operated in Level 1 or Level 2 as follows:-

Operation Action Indication

To Run the timer Press and quickly release

▼

▲

Beacon -- RUN = On

Scrolling display - TIMER RUNNING

To Hold the timer Press and quickly release

▼

▲

Beacon -- RUN = Flashing

Scrolling display - TIMER HOLD

To Reset the timer

Press and hold

▼

▲

for more than 1 second

Beacon -- RUN = Off

If the timer is a Dwell Type and configured to turn power

off at the end of the timing period OFF will be displayed

Timer has timed out Beacon -- RUN = Off SPX = On if End Type = SP2

Scrolling display - TIMER END

To Reset the timer

after it has timed out

Press and hold

▼

▲

for more than 1 second

Beacon -- RUN = Off SPX = On if End Type = SP2

If the timer is a Dwell Type and configured to turn power

off at the end of the timing period OFF will be displayed.

To Cancel the ‘end’

output (if configured)

Press

If a logic (relay) output is configured to operate when the

timer has timed out, it can be cancelled by pressing these

two buttons (Ack)

Repeat the above to Run the timer again (Note: it is not essential to reset it after the End state is reached)

1 2 ... 32 33 34 35 36 37 38 39 40

Brak uwag

Eurotherm 3116 PID Podręcznik Użytkownika Strona 37