Eurotherm 3116 PID Podręcznik Użytkownika Pobierz pdf (Strona 22)

3116 User Guide Part No. HA028005ENG Issue 2.0 May 04

ENG

5.4.6 Other Commonly Used Operator Parameters Available in Level 1

Operator level 1 is designed for day to day operation of the controller and parameters are not protected by a security

code.

Press

to scroll through a list of commonly used parameters.

A list of other operating parameters is available each time this button is pressed. The parameter mnemonic and its

scrolling description are shown in the lower display. The value of the parameter is shown in the upper display. The actual

parameters shown depend upon the functions configured and are:-

Parameter Mnemonic and

Scrolling Display

Description Alterability

WRK.OP WORKING OUTPUT The current output Shown when the controller is in AUTO or OFF

mode and is read only

WKG.SP WORKING SETPOINT The setpoint which the

controller is currently

using

Only shown when the controller is in MAN or

OFF mode and is read only

SP1 (or 2) SETPOINT 1 (or 2) To adjust setpoint 1 (or 2)

Press

▼

▲

to adjust

T.REMN TIME REMAINING Time to end of set timer

period

Read only

0:00 to 99.59 hh:mm or mm:ss

DWELL SET TIME DURATION Set dwell time Only shown if timer (not programmer)

configured. Press

▼

▲

to adjust

AX.YYY ALARM X SETPOINT

X= alarm number YYY= alarm type

Alarm 1, 2, 3 or 4 setpoint

(if the alarm is configured)

Read only

LD.AMP LOAD CURRENT Load current Read only and only shown if CT is configured

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 39 40

Brak uwag

Eurotherm 3116 PID Podręcznik Użytkownika Strona 22